How to Install Tuxonice in Ubuntu

How to Install Tuxonice in Ubuntu | Ubuntu Geek

"TuxOnIce is most easily described as the Linux equivalentof Windows' hibernate functionality, but better. It saves the contents of memory to disk and powers down. When the computer is started up again, it reloads the contents and the user can continue from where they left off. No documents need to be reloaded or applications reopened and the process is much faster than a normal shutdown and start up." – tuxonice.net

Tuxonice is an alternative way to hibernate your machine than the standard ubuntu power manager way. It generally claims to be more configurable and flexible than the standard method, with faster hibernate and resume times.

How to Fix a Running Toilet

How to Fix a Running Toilet - wikiHow

Replace the flapper. If the toilet stops filling and then starts again intermittently, you have a slow leak. Try this to be certain. Place a dye tablet or a few drops of food coloring in the tank. Your local hardware store may have free dye tablets for this purpose. If, after an hour or two without flushing, you see this dye in the bowl, you have a slow leak, a small amount of water running into the bowl. The most common cause of slow leaks is a leaky flapper. Over time, this inexpensive rubber part decays, or minerals build up on it. Cleaning may work to remove mineral buildup, but it's usually best just to replace the whole part. There are a few standard kinds. Take your old one with you to the hardware store if you want the comparison to get the right size.

Close this valve by turning it clockwise, as you would a faucet.

• To perform the replacement, simply close the valve sticking out of the wall under your toilet tank.
• Flush the toilet. If the valve is completely closed, the tank will not refill and you will not hear water running after the tank empties.
• Pop the old flapper off its hinges, disconnect it from the chain, and pop the new one into place.
• Run a finger carefully around the rim where the flapper seats. Remove any uneven buildup of minerals that might cause a leak.
• Don't forget to open the valve all the way when you're ready for water again.
• Try flushing a few times to make sure the chain is the right length for the new flapper. It should open when you push the handle and then drop closed all the way when the tank empties. You may have to trim and adjust the chain by trial and error. Also, make sure that the flapper aligns properly with the opening.